⌖ Open the aim trainer
CS2 → Valorant

CS2 to Valorant
Sensitivity Converter

Going from CS2 to Valorant? Multiply your sens by 0.3143. That keeps your cm/360 (the mouse distance for a full turn) identical, so CS2 1.1 becomes Valorant 0.346 at any DPI. Use the converter for your exact number, then warm up at it in the browser.

Valorant sensitivity
0.346
cm / 360°
47.2
eDPI
277
inches / 360°
18.6"
Warm up at this sens → Loads this Valorant sens and DPI into Online Aim Trainer.

The CS2 to Valorant multiplier

CS2 → Valorant
× 0.3143
Valorant sens = CS2 sens × 0.022 / 0.07
Valorant → CS2
× 3.182
CS2 sens = Valorant sens × 0.07 / 0.022

Every shooter turns the camera a fixed angle per mouse count at sensitivity 1. That angle is the game's yaw: 0.022 degrees in CS2, 0.07 in Valorant. Your real sensitivity is cm/360 = 2.54 × 360 / (DPI × sens × yaw), so holding it constant across games leaves one ratio of yaws: 0.022 / 0.07 = 0.3143. DPI cancels out, so the multiplier is the same at 400, 800 or 1600 DPI.

CS2 is the most common switch into and out of Valorant. Both are slow, precise tactical shooters, so muscle memory carries over cleanly once the cm/360 matches.

Valorant turns 0.07 degrees per mouse count at sensitivity 1, more than three times the Source-engine rate, which is why Valorant numbers look so small next to CS2 or Apex values.

CS2 sens to Valorant: conversion table

Common CS2 sensitivities and their Valorant equivalents. cm/360 is measured at 800 DPI and is the same in both games; at 400 DPI double it, at 1600 DPI halve it. These rows span 26.0 to 86.6 cm/360.

CS2 sens→ Valorant senscm/360 @ 800 DPICS2 eDPIValorant eDPI
0.60.18986.6 cm480151
0.80.25164.9 cm640201
10.31452.0 cm800251
1.10.34647.2 cm880277
1.250.39341.6 cm1000314
1.50.47134.6 cm1200377
1.80.56628.9 cm1440453
20.62926.0 cm1600503

eDPI (sens × DPI) only compares within one game: CS2 eDPI 880 is the same aim as Valorant eDPI 277. Compare cm/360 across games instead.

Field of view: why it may not feel identical

CS2

CS2 has no field-of-view slider: it is 90 degrees measured on a 4:3 frame, which is about 106.26 degrees horizontal on a 16:9 screen. Only the cheat-protected fov_cs_debug command changes it.

Valorant

Valorant has no field-of-view setting: it is locked at 103 degrees horizontal on a 16:9 screen.

CS2 shows about 3.3 degrees more of the world across a 16:9 screen than Valorant. At the same cm/360 the scene slides across the screen a little slower in CS2, so small corrections can feel a touch slower there, even though a full turn takes exactly the same mouse distance.

Where to set it in Valorant

In Valorant, the setting lives at Settings > General > Mouse > Sensitivity: Aim.

Your current number is in CS2 at Settings (the cog, top left) > Keyboard / Mouse > Mouse Sensitivity.

CS2 input

Raw input is always on in CS2: the old m_rawinput command was removed, so Windows pointer settings never touch your in-game aim.

Valorant input

Valorant reads the mouse with raw input. The Raw Input Buffer option Riot added in patch 3.07 changes how those reports are processed, not how far a count turns you.

Then warm up at Valorant 0.346 (800 DPI) in the browser: the trainer runs at Valorant's own turn rate, so the number you type is the number you train. Change the values in the converter first and the button above carries your exact sens.

CS2 to Valorant FAQ

How do I convert CS2 sensitivity to Valorant?

Multiply your CS2 sens by 0.3143 (0.022 divided by 0.07). For example CS2 1.1 becomes Valorant 0.346, which is 47.2 cm/360 at 800 DPI in both games. Keep the same DPI and the full-turn distance stays identical.

What is the Valorant to CS2 multiplier?

Multiply your Valorant sens by 3.182 (0.07 divided by 0.022) to get the CS2 value with the same cm/360. Valorant 0.346 goes back to CS2 1.1.

Will Valorant feel exactly like CS2 after converting?

A full 360 turn will take exactly the same mouse distance. CS2 shows about 3.3 degrees more of the world across a 16:9 screen than Valorant. At the same cm/360 the scene slides across the screen a little slower in CS2, so small corrections can feel a touch slower there, even though a full turn takes exactly the same mouse distance.

Does DPI change the CS2 to Valorant conversion?

No. With the same DPI in both games the multiplier is always 0.3143. DPI only changes your cm/360 and eDPI. If you change DPI, scale the sens by old DPI divided by new DPI: going from 800 to 1600 DPI, Valorant 0.346 becomes 0.1729.

Where do I enter my sensitivity in Valorant?

In Valorant, the setting lives at Settings > General > Mouse > Sensitivity: Aim.

Related converters

Copied ✓