Valorant Sensitivity Converter
Moving to Valorant or from it? Keep your aim either way. This converter matches your cm/360 (the real distance to spin 360°) between Valorant, CS2, CS:GO, Apex Legends, Overwatch 2 and Deadlock. Press ⇄ to flip the direction, copy the number, then warm up at your new sens in the browser.
How sensitivity conversion works
Every shooter turns your camera by a fixed angle per "count" your mouse reports, its yaw. Multiply that by your in-game sensitivity and your DPI and you get cm/360: the physical distance you drag the mouse to spin a full circle. That number, not the raw sensitivity value, is your real aim.
To convert, we hold cm/360 constant and solve for the other game's sensitivity. Keep the same DPI and the conversion is a fixed ratio of the two games' yaws, so it works the same in both directions: Valorant turns 0.07 degrees per count, CS2, CS:GO and Apex 0.022, Overwatch 2 0.0066. That is why a Valorant number is usually lower than your CS2 or Apex value and much lower than your Overwatch 2 one, and why going from Valorant multiplies it back up.
Common conversions, both ways
Typical examples at 800 DPI. Left: a common sens in each game converted to Valorant. Right: a Valorant 0.35 converted to each game. Your exact numbers depend on your sens and DPI above.
| Game | Their sens | → Valorant | cm/360 | Valorant sens | → Their sens | cm/360 |
|---|---|---|---|---|---|---|
| CS2 | 1.1 | 0.346 | 47.2 cm | 0.35 | 1.114 | 46.7 cm |
| CS:GO | 1.1 | 0.346 | 47.2 cm | 0.35 | 1.114 | 46.7 cm |
| Apex Legends | 1.4 | 0.44 | 37.1 cm | 0.35 | 1.11 | 46.7 cm |
| Overwatch 2 | 5 | 0.471 | 34.6 cm | 0.35 | 3.71 | 46.7 cm |
| Deadlock | 1.2 | 0.377 | 43.3 cm | 0.35 | 1.11 | 46.7 cm |
Convert a specific pair
Each pair has its own page with the exact multiplier both ways, a conversion table with cm/360 and eDPI, the field-of-view difference and where to paste the setting.
Convert to Valorant
Convert from Valorant
Sensitivity FAQ
How do I convert my sensitivity to Valorant?
Pick the game you play now, enter your in-game sensitivity and mouse DPI, and leave Valorant as the target. The converter keeps your cm/360 (the mouse distance for a full 360 degree turn) identical, so your aim carries over. Paste the result into Valorant at Settings > General > Mouse > Sensitivity: Aim.
How do I convert my Valorant sensitivity to another game?
Set Valorant as the "from" game (or press the swap button), enter your Valorant sens and DPI, and choose CS2, CS:GO, Apex Legends, Overwatch 2 or Deadlock as the target. Valorant turns 0.07 degrees per count, so going to CS2 or Apex you multiply by about 3.18, and going to Overwatch 2 by about 10.61.
What is cm/360 and why does it matter?
cm/360 is how many centimetres you move your mouse to make a full 360 degree turn in game. It is the real measure of sensitivity across games: if it matches in two games, a full turn takes the same arm movement in both, which is exactly what a converter preserves.
Does DPI change the conversion?
Not if you keep the same DPI in both games: the converted sensitivity is then a fixed ratio of the two games' turn rates. DPI is still needed to show your cm/360 and eDPI, and if you change DPI you must recalculate.
Will my aim feel identical after converting?
A full turn will take the same distance, but games that show a different field of view still look different on screen: a wider view makes the same cm/360 look a little slower. Each pair page lists both games' field of view so you know what to expect.
What is a good Valorant sensitivity?
Valorant is a slow, tactical shooter, so most players use a fairly low sens: roughly 25–45 cm/360. Many pros sit around 30–40 cm/360, for example 0.3–0.4 in-game at 800 DPI.
Once you've converted, test it in a few drills and fine-tune.