Valorant to CS2
Sensitivity Converter
Going from Valorant to CS2? Multiply your sens by 3.182. That keeps your cm/360 (the mouse distance for a full turn) identical, so Valorant 0.35 becomes CS2 1.114 at any DPI. Use the converter for your exact number, then warm up at it in the browser.
The Valorant to CS2 multiplier
Every shooter turns the camera a fixed angle per mouse count at sensitivity 1. That angle is the game's yaw: 0.07 degrees in Valorant, 0.022 in CS2. Your real sensitivity is cm/360 = 2.54 × 360 / (DPI × sens × yaw), so holding it constant across games leaves one ratio of yaws: 0.07 / 0.022 = 3.182. DPI cancels out, so the multiplier is the same at 400, 800 or 1600 DPI.
Valorant turns 0.07 degrees per mouse count at sensitivity 1, more than three times the Source-engine rate, which is why Valorant numbers look so small next to CS2 or Apex values.
CS2 is the most common switch into and out of Valorant. Both are slow, precise tactical shooters, so muscle memory carries over cleanly once the cm/360 matches.
Valorant sens to CS2: conversion table
Common Valorant sensitivities and their CS2 equivalents. cm/360 is measured at 800 DPI and is the same in both games; at 400 DPI double it, at 1600 DPI halve it. These rows span 27.2 to 81.6 cm/360.
| Valorant sens | → CS2 sens | cm/360 @ 800 DPI | Valorant eDPI | CS2 eDPI |
|---|---|---|---|---|
| 0.2 | 0.636 | 81.6 cm | 160 | 509 |
| 0.25 | 0.795 | 65.3 cm | 200 | 636 |
| 0.3 | 0.955 | 54.4 cm | 240 | 764 |
| 0.35 | 1.114 | 46.7 cm | 280 | 891 |
| 0.4 | 1.273 | 40.8 cm | 320 | 1018 |
| 0.45 | 1.432 | 36.3 cm | 360 | 1145 |
| 0.5 | 1.591 | 32.7 cm | 400 | 1273 |
| 0.6 | 1.909 | 27.2 cm | 480 | 1527 |
eDPI (sens × DPI) only compares within one game: Valorant eDPI 280 is the same aim as CS2 eDPI 891. Compare cm/360 across games instead.
Field of view: why it may not feel identical
Valorant
Valorant has no field-of-view setting: it is locked at 103 degrees horizontal on a 16:9 screen.
CS2
CS2 has no field-of-view slider: it is 90 degrees measured on a 4:3 frame, which is about 106.26 degrees horizontal on a 16:9 screen. Only the cheat-protected fov_cs_debug command changes it.
Where to set it in CS2
In CS2, the setting lives at Settings (the cog, top left) > Keyboard / Mouse > Mouse Sensitivity. Or open the console and type sensitivity 1.114.
Your current number is in Valorant at Settings > General > Mouse > Sensitivity: Aim.
Valorant input
Valorant reads the mouse with raw input. The Raw Input Buffer option Riot added in patch 3.07 changes how those reports are processed, not how far a count turns you.
CS2 input
Raw input is always on in CS2: the old m_rawinput command was removed, so Windows pointer settings never touch your in-game aim.
Then warm up at CS2 1.114 (800 DPI) in the browser: the trainer runs at CS2's own turn rate, so the number you type is the number you train. Change the values in the converter first and the button above carries your exact sens.
Valorant to CS2 FAQ
How do I convert Valorant sensitivity to CS2?
Multiply your Valorant sens by 3.182 (0.07 divided by 0.022). For example Valorant 0.35 becomes CS2 1.114, which is 46.7 cm/360 at 800 DPI in both games. Keep the same DPI and the full-turn distance stays identical.
What is the CS2 to Valorant multiplier?
Multiply your CS2 sens by 0.3143 (0.022 divided by 0.07) to get the Valorant value with the same cm/360. CS2 1.114 goes back to Valorant 0.35.
Will CS2 feel exactly like Valorant after converting?
A full 360 turn will take exactly the same mouse distance. CS2 shows about 3.3 degrees more of the world across a 16:9 screen than Valorant. At the same cm/360 the scene slides across the screen a little slower in CS2, so small corrections can feel a touch slower there, even though a full turn takes exactly the same mouse distance.
Does DPI change the Valorant to CS2 conversion?
No. With the same DPI in both games the multiplier is always 3.182. DPI only changes your cm/360 and eDPI. If you change DPI, scale the sens by old DPI divided by new DPI: going from 800 to 1600 DPI, CS2 1.114 becomes 0.5568.
Where do I enter my sensitivity in CS2?
In CS2, the setting lives at Settings (the cog, top left) > Keyboard / Mouse > Mouse Sensitivity. You can also open the console and type sensitivity 1.114.