⌖ Open the aim trainer
CS:GO → CS2

CS:GO to CS2
Sensitivity Converter

CS:GO and CS2 turn the same 0.022 degrees per mouse count, so your sensitivity carries over 1:1: at the same DPI, type the same number. They also share a field of view, so the one thing to check is how each game reads your mouse, covered below.

CS2 sensitivity
1.1
cm / 360°
47.2
eDPI
880
inches / 360°
18.6"
Warm up at this sens → Loads this CS2 sens and DPI into Online Aim Trainer.

The CS:GO to CS2 multiplier

CS:GO → CS2
× 1
CS2 sens = CS:GO sens × 0.022 / 0.022
CS2 → CS:GO
× 1
CS:GO sens = CS2 sens × 0.022 / 0.022

Every shooter turns the camera a fixed angle per mouse count at sensitivity 1. That angle is the game's yaw: 0.022 degrees in CS:GO, 0.022 in CS2. Your real sensitivity is cm/360 = 2.54 × 360 / (DPI × sens × yaw), so holding it constant across games leaves one ratio of yaws: here it is exactly 1, which is why the number does not change.

CS:GO and CS2 share the same turn rate, so a CS:GO sens carries straight into CS2 and converts to every other game exactly as a CS2 sens would.

CS2 is the most common switch into and out of Valorant. Both are slow, precise tactical shooters, so muscle memory carries over cleanly once the cm/360 matches.

CS:GO and CS2 sens: cm/360 by DPI

The number doesn't change between CS:GO and CS2, so here is what each common value means in real distance. If you changed DPI between the two games, find your cm/360 here and pick the sens that gives it at your new DPI.

Sens (both games)cm/360 @ 400 DPI@ 800 DPI@ 1600 DPIeDPI @ 800
0.6173.2 cm86.6 cm43.3 cm480
0.8129.9 cm64.9 cm32.5 cm640
1103.9 cm52.0 cm26.0 cm800
1.194.5 cm47.2 cm23.6 cm880
1.2583.1 cm41.6 cm20.8 cm1000
1.569.3 cm34.6 cm17.3 cm1200
1.857.7 cm28.9 cm14.4 cm1440
252.0 cm26.0 cm13.0 cm1600

eDPI (sens × DPI) is directly comparable between CS:GO and CS2, because they share a yaw.

Field of view: the same in both

CS:GO

CS:GO, like CS2, is fixed at 90 degrees on a 4:3 frame, about 106.26 degrees horizontal on 16:9, with no slider.

CS2

CS2 has no field-of-view slider: it is 90 degrees measured on a 4:3 frame, which is about 106.26 degrees horizontal on a 16:9 screen. Only the cheat-protected fov_cs_debug command changes it.

Both games show the same view, so at the same cm/360 CS:GO and CS2 should feel the same on screen as well as in your arm.

Where to set it in CS2

In CS2, the setting lives at Settings (the cog, top left) > Keyboard / Mouse > Mouse Sensitivity. Or open the console and type sensitivity 1.1.

CS:GO input

CS:GO had an m_rawinput toggle. With raw input off, Windows pointer settings (including Enhance pointer precision) could change how your CS:GO sens felt; CS2 removed that toggle.

CS2 input

Raw input is always on in CS2: the old m_rawinput command was removed, so Windows pointer settings never touch your in-game aim.

Then warm up at CS2 1.1 (800 DPI) in the browser: the trainer runs at CS2's own turn rate, so the number you type is the number you train. Change the values in the converter first and the button above carries your exact sens.

CS:GO to CS2 FAQ

Is CS:GO sensitivity the same as CS2?

Yes. CS:GO and CS2 both turn 0.022 degrees per mouse count at sensitivity 1, so at the same DPI the number is identical: CS:GO 1.1 is CS2 1.1, 47.2 cm/360 at 800 DPI. Copy it across unchanged.

What is the CS2 to CS:GO multiplier?

It is 1. Going from CS2 back to CS:GO you also keep the same number, because the two games share a turn rate.

Will CS2 feel exactly like CS:GO after converting?

A full 360 turn will take exactly the same mouse distance. Both games show the same view, so at the same cm/360 CS:GO and CS2 should feel the same on screen as well as in your arm.

Does DPI change the CS:GO to CS2 conversion?

No. With the same DPI in both games the multiplier is always 1. DPI only changes your cm/360 and eDPI. If you change DPI, scale the sens by old DPI divided by new DPI: going from 800 to 1600 DPI, CS2 1.1 becomes 0.55.

Where do I enter my sensitivity in CS2?

In CS2, the setting lives at Settings (the cog, top left) > Keyboard / Mouse > Mouse Sensitivity. You can also open the console and type sensitivity 1.1.

Related converters

Copied ✓