CS:GO to Overwatch 2
Sensitivity Converter
Going from CS:GO to Overwatch 2? Multiply your sens by 3.333. That keeps your cm/360 (the mouse distance for a full turn) identical, so CS:GO 1.1 becomes Overwatch 2 3.67 at any DPI. Use the converter for your exact number, then warm up at it in the browser.
The CS:GO to Overwatch 2 multiplier
Every shooter turns the camera a fixed angle per mouse count at sensitivity 1. That angle is the game's yaw: 0.022 degrees in CS:GO, 0.0066 in Overwatch 2. Your real sensitivity is cm/360 = 2.54 × 360 / (DPI × sens × yaw), so holding it constant across games leaves one ratio of yaws: 0.022 / 0.0066 = 3.333. DPI cancels out, so the multiplier is the same at 400, 800 or 1600 DPI.
CS:GO and CS2 share the same turn rate, so a CS:GO sens carries straight into CS2 and converts to every other game exactly as a CS2 sens would.
Overwatch 2 turns far less per sensitivity point than any other game here, so its numbers look huge next to Valorant or CS2 values. Only cm/360 is comparable.
CS:GO sens to Overwatch 2: conversion table
Common CS:GO sensitivities and their Overwatch 2 equivalents. cm/360 is measured at 800 DPI and is the same in both games; at 400 DPI double it, at 1600 DPI halve it. These rows span 26.0 to 86.6 cm/360.
| CS:GO sens | → Overwatch 2 sens | cm/360 @ 800 DPI | CS:GO eDPI | Overwatch 2 eDPI |
|---|---|---|---|---|
| 0.6 | 2 | 86.6 cm | 480 | 1600 |
| 0.8 | 2.67 | 64.9 cm | 640 | 2133 |
| 1 | 3.33 | 52.0 cm | 800 | 2667 |
| 1.1 | 3.67 | 47.2 cm | 880 | 2933 |
| 1.25 | 4.17 | 41.6 cm | 1000 | 3333 |
| 1.5 | 5 | 34.6 cm | 1200 | 4000 |
| 1.8 | 6 | 28.9 cm | 1440 | 4800 |
| 2 | 6.67 | 26.0 cm | 1600 | 5333 |
eDPI (sens × DPI) only compares within one game: CS:GO eDPI 880 is the same aim as Overwatch 2 eDPI 2933. Compare cm/360 across games instead.
Field of view: why it may not feel identical
CS:GO
CS:GO, like CS2, is fixed at 90 degrees on a 4:3 frame, about 106.26 degrees horizontal on 16:9, with no slider.
Overwatch 2
Overwatch 2 has a field-of-view slider under Options > Video, measured horizontally on 16:9, with a maximum of 103.
Where to set it in Overwatch 2
In Overwatch 2, the setting lives at Options > Controls > General > Mouse > Sensitivity (Change Hero sets a per-hero value).
CS:GO input
CS:GO had an m_rawinput toggle. With raw input off, Windows pointer settings (including Enhance pointer precision) could change how your CS:GO sens felt; CS2 removed that toggle.
Overwatch 2 input
Overwatch 2 has an Enable High Precision Mouse Input option in its Gameplay settings. It lets shots register between frames; it does not change your turn rate.
Then warm up at Overwatch 2 3.67 (800 DPI) in the browser: the trainer runs at Overwatch 2's own turn rate, so the number you type is the number you train. Change the values in the converter first and the button above carries your exact sens.
CS:GO to Overwatch 2 FAQ
How do I convert CS:GO sensitivity to Overwatch 2?
Multiply your CS:GO sens by 3.333 (0.022 divided by 0.0066). For example CS:GO 1.1 becomes Overwatch 2 3.67, which is 47.2 cm/360 at 800 DPI in both games. Keep the same DPI and the full-turn distance stays identical.
What is the Overwatch 2 to CS:GO multiplier?
Multiply your Overwatch 2 sens by 0.3 (0.0066 divided by 0.022) to get the CS:GO value with the same cm/360. Overwatch 2 3.67 goes back to CS:GO 1.1.
Will Overwatch 2 feel exactly like CS:GO after converting?
A full 360 turn will take exactly the same mouse distance. Overwatch 2 tops out at 103, about 3.3 degrees narrower than CS:GO's 106.26 on 16:9. At the same cm/360, Overwatch 2 at its maximum will look slightly faster on screen; 103 is the closest match you can get.
Does DPI change the CS:GO to Overwatch 2 conversion?
No. With the same DPI in both games the multiplier is always 3.333. DPI only changes your cm/360 and eDPI. If you change DPI, scale the sens by old DPI divided by new DPI: going from 800 to 1600 DPI, Overwatch 2 3.67 becomes 1.833.
Where do I enter my sensitivity in Overwatch 2?
In Overwatch 2, the setting lives at Options > Controls > General > Mouse > Sensitivity (Change Hero sets a per-hero value).